Honda Honda CBF 150 Kullanıcıları / Bilgi Paylaşım Başlığı

Katılım
4 Eyl 2005
Mesajlar
1,077
lew242,
this bike is very good..
because low fuel costs,cheap spare parts...
as far as i know it is reliable because some couriers(i hope this is the right word-people who delivers papers) use this bike..
this means your choice is good
enjoy your ride..

arkadaşım ne sormuş lew 242 türkçeye çevirirmisin bi zahmet:rendeer:
 
Katılım
4 Ağu 2005
Mesajlar
3,759
cınde yasayan bı ıngılızce ogretmenıymıs
cınde buyuk motorlara ızın verılmedıgı ıcın ybr ıle cbf arasında kalıp cbf almıs
kısaca memnunmusunuz dıye sormus..
bende duydugumu(kullanmadıgım ıcın)yazdım:)
yanı ucuz parca az benzın dayanıklılık
 
Katılım
27 Şub 2007
Mesajlar
14
What do any of you think about the performance and handling of the motorcycle?

Oh, sorry, thankyou for your good English reply praetorian, and couriers is the right word.:cat:
 
Son düzenleme:
Katılım
4 Ağu 2005
Mesajlar
3,759
i didnt use or test it by myself but again:) i heard that accelaration is better than ybr 125 and it is easy to use..
so you wont have any problems(caused by handling) while using cbf 150..

ps:top speed is between 120-130 km / h

sımdıde performansı ve kullanımı nası(kontrol edılebılırlık acısından)

bu arada 120 130 max hızı dımı yannıs yazmıs olmuym
 
Katılım
22 Ara 2006
Mesajlar
842
Motosikleti
2022-SYM Jet 14 200 + 2011-KLX250 + 2015-KTM Duke 200(arızalı yatış)
Dear Lew242,

If you are looking for a bike which will accompany with fun on the roads, this is a good choice. Low fuel consumption,very good price/performance ratio and newer engine tech.

It has roller rocker arms and it brings a vibration free performance when you compare with YBR125. YBR was a legend and I think CBF is not in the same classment with YBR125.

Bike has a good picking up, handling and stability even with a pillion. Top speed is not barrier breaker but this bike is to ride with joy. It can reach 110kmh. without a problem.
 
Katılım
28 Mar 2006
Mesajlar
162
Yanlış anlamayın arkadaşlar ama bir şey dikkatimi çekti. Sitemizin ingilizce seçeneği yok. Peki bu arkadaş türkçe bilmeden nasıl siteye üye olmayı becerebilmiş acaba? :silent:
 
Katılım
27 Haz 2005
Mesajlar
532
Ah ulen ah.Bi kaç hafta öncesine kadar 3250 YTL civarlarında sıfırı satılan CBF 150'nin ikinci eline istenen fiyat.
CBF 150'yi sıfır ya da ikinci el olarak almayı düşünenlerin ama maddi ya da başka nedenlerle zamdan önce alamayanların yediği şu kazık yok mu...!?:pale:

Ben o kadar bağırdım ! alın arkadaşlar bakmayın yalan yanlış atıp tutanlara diye ama dinletemedim .
ben ve benim gibi uyarı yapan arkadaşları dinlemeyip almayan arkadaşlar için sadece üzülüyorum ...
selamlar.
 
Katılım
7 Tem 2006
Mesajlar
2,052
Arkadaslar acaba sıfır cbf150'yi peşin para ile ne kadara alabiliriz sıfırını?Ayrıca bursa'dan alan vrsa ne kadara aldı merak ediyorum..Bu hafta kısmetse motorlanacağım da...eski fiyatı olsaydı hiç düşünmeden alırdım ama şimdi 4000ytl vermek hiç de akıllıca deil doğrusu...
 
Katılım
27 Şub 2007
Mesajlar
14
Thankyou for your replies aybarssurucu and praetorian.

Is the factory that these motorcycles are made in Turkey? The Chinese bikes have different handlebars clocks.
 
Katılım
14 Eki 2005
Mesajlar
1,956
Motosikleti
Honda CBF 150, CF Moto MT 650
Thankyou for your replies aybarssurucu and praetorian.

Is the factory that these motorcycles are made in Turkey? The Chinese bikes have different handlebars clocks.

cbf 150's that we use are for the turkey market i think.
the ones that are in india are known as unicorn and are different from the ones here.
although they are the same motorcycles, some minor differencies are made for the countries conditions.
for example unicorn has a fluid in the tyres for avoid burst, cbf 150 has not.
 
Katılım
30 Tem 2006
Mesajlar
4,311
Hi brother lew242
i want to say we haven't had such an experience that someone from a different country writng with us in this forum :)
Welcome to our motocycle world:rendeer:
Thankyou for your replies aybarssurucu and praetorian.

Is the factory that these motorcycles are made in Turkey? The Chinese bikes have different handlebars clocks.

No,they aren't made in turkey.Made in chine.
I have a ybr and i rode two bikes,i have to admit that cbf150 is bigger and little bit faster than ybr .
Can i ask u a question.What are the prices of cbf150 and ybr in your country ?

Arkadaşa bi karşılama yapiim dedim işallah bizi yemiyordur:mrgreen:
 
Süper Moderatör
Yönetici
Katılım
10 May 2005
Mesajlar
4,906
Motosikleti
Harley Davidson Softail 107
Çin den yazdığını söyleyen bu dostumuz IP numarası Çin e ait bir IP.

Fake olma olasılığı az yani..
 
Katılım
27 Şub 2007
Mesajlar
14
PIERzig, OK so made in China! These motorcycles, are from Sundiro Honda in Guangzhou Province or Honda near Shanghai?

I think Chinese bikes are usually better quality than Indian bikes.

My bike cost 9,380 Chinese RMB which is 1,212.20 USD or 1,723.20 TRY Lira.

What tires do the CBF150 motorcycles come with in Turkey?

I'm happy to have new friends from Turkey.
 
Katılım
1 Haz 2005
Mesajlar
8,608
Ne oluyor yahu, madem Türkçe bilmiyor nasıl anlıyor yazılanları :)
Olcay araştır bence, kim bu hehe imdat sitemizi bastılar :mrgreen: :queen:
 
Katılım
22 Mar 2005
Mesajlar
1,096
PIERzig, OK so made in China! These motorcycles, are from Sundiro Honda in Guangzhou Province or Honda near Shanghai?
I think Chinese bikes are usually better quality than Indian bikes.
My bike cost 9,380 Chinese RMB which is 1,212.20 USD or 1,723.20 TRY Lira.
What tires do the CBF150 motorcycles come with in Turkey?
I'm happy to have new friends from Turkey.
So we pay 4,150 Liras, here in Turkiye ::rantinp:
Lew, I've been using CBF for 400 kilometers and with both fuel consumption and torque, it really is an excellent bike. I don't know whether gradients around there or not, but you feel the difference of a powerful engine of its segment when you jump over this hilarious Honda. You'll enjoy it one way or the other, but I strongly recommend you to have this little boy :cat:
 

Bu konuyu görüntüleyen kullanıcılar

Çok Beğenilen Mesajlar

Üst