- Katılım
- 27 Haz 2006
- Mesajlar
- 789
Chaingang'den alıntıdır.Ben motor çalışırken düğmeye uzun süre basarak kapatıyorum ama bazen inat ediyor ve kapanmıyor. Tekrar açmak için kontağı kapatıp tekrar açıyorum. Düğmeye basıp tekrar açmayı ilk defa duydum.
ABS'yi arazi dışında kapatmak bencede güvenli değil. Ama arazide ABS açık gitmek kafa göz yarabilir (youtube'da bir 1200GS'in yokuş aşağı inişi vardı, görseniz bir daha ABS açık araziye girmezsiniz)
Note 1. The ABS can't be deactivated while moving. This prevents the ABS from accidental deactivation due to a wiring fault in the switch etc.
Note 2. If you are having a hard time turning off your ABS, just rock the bike backwards or forwards a few inches (it wouldn't even take that much) and try the regular procedure again. (Seacuke #1214).
Note 3. If you hold the ABS button too long, the ABS will reactivate, and you will need to turn the bike off and on again before you can disable the ABS again. This is a safety feature in case the button is broken, and results in the ABS being enabled by default (if possible).
Note 4. If the ABS light does not start flashing after a few seconds and Note 2 does not help (rocking the bike back and forth a bit), the wiring on the switch may have come loose.
Benim böyle yapmamın sebebi; durup motoru stop ettirip bir daha çalıştırma prosedürünü atlamak için.
Sizin dediğiniz yöntem de yazılı.
