10 puanlık kışa hazır olma çabası içinde olan sürücü sorusu;
Rx3 ün antifriz depo kapasitesi kaç ml'dir?
http://www.cscmotorcycles.com/Articles.asp?ID=260
Linki incelemenizi tavsiye ederim, çok detay anlatmış...
Sorunuzun özet cevabı : "The system coolant capacity is 1.0 liter."
This tutorial addresses the cooling system on your RX3 motorcycle. The RX3 is water cooled (actually, its an ethylene glycol and water mix), and you can see your bikes operating temperature on the right side of the instrument cluster.
Anything below the max bar is okay. In the photo above, we were riding through Joshua Tree National Park on a very cold day, and the temperature indicator never got above two bars. On warm days, when stopped in traffic, or when climbing hills, the temperature indicator will go up to three or four bars. Its normal.
Lets start our cooling system discussion by considering safety issues:
Only work on the cooling system when the engine is cold.
When opening the radiator cap, always cover the radiator cap with a cloth and open it slowly to prevent being scalded by escaping hot fluid.
Always immediately wipe up any spilled cooling fluid.
Only use a quality 50/50 ethylene glycol/distilled water cooling fluid with corrosion inhibitors intended for use in aluminum engines.
The RX3 cooling system consists of the following components:
Two radiators located under the fuel tank.
Two fans (one for each radiator).
Hoses connecting the radiators and the engine.
A water pump.
Cooling fluid. The system coolant capacity is 1.0 liter.
A temperature sensor (located on the bottom of the left radiator).
An overflow container located to the left of the right radiator.
A thermostat located on the top right of the cylinder (its where the cooling system hose attaches to the engine).